Skip to content
Toilet clog cleared with an auger, Rooter-Man Plumbing of Tacoma

Whole-House Repiping in Des Moines

Des Moines, WA · King County

Rooter-Man Plumbing of Tacoma offers whole-house repiping in Des Moines, about 35 minutes from our base on Tacoma's southeast side.

  • Family- and veteran-owned
  • Licensed, bonded and insured
  • 20+ years of trusted local service

At a glance

Des Moines is in King County. We head out on I-5 north, roughly 20 miles. A $49 diagnostic fee finds the cause and is waived when you approve the repair, and you get a flat-rate price before work begins.

  • 20 mi

    From our base on Tacoma's southeast side.

  • 35 min

    Typical drive from our Tacoma base.

  • Flat rate

    Your price, parts and labor included, before work begins.

  • Wisetack

    Financing for bigger jobs, subject to approval.

Signs your Des Moines home needs whole-house repiping

  • Low pressure at several taps
  • Brown or rusty water
  • Gray plastic pipe in the crawlspace
  • Repeat leaks in different spots
  • Green spots or pinholes on copper
  • Water stains on walls or ceilings

Tired of patching leaks? Call any hour and a real person will help you set up a repipe visit. Call (253) 600-1335

How long it takes

Home visit and quoteTypically 1 to 2 hours
Full repipeTypically several days
Water shutoffsPart of some workdays

Typical times on site. Des Moines is about 35 minutes from our base.

Repiping in Des Moines: what is different here

Many mid-century homes in Des Moines, from Zenith to the Marina District, were plumbed with galvanized steel or early copper. On hillside lots above Puget Sound, low pressure on the upper floor can be a sign the old pipe is narrowing. We drive I-5 north, about 35 minutes, and quote a PEX repipe at a flat rate.

Where we work in Des Moines

  • Marina District
  • Redondo
  • Woodmont
  • Zenith
  • Pacific Ridge
  • North Hill
  • Saltwater State Park area
  • Wooton Park area

How the job runs

  1. Walk through the home

    We check your pipes at each fixture and in the crawlspace, test pressure and note the pipe type.
  2. Flat-rate quote

    You get one flat-rate price for the full repipe. It spells out where walls will be opened.
  3. Run new PEX lines

    We run new PEX to each fixture through crawlspaces, attics and wall openings.
  4. Test and clean up

    We pressure test the new lines, check every tap and clean up.

Talk to us about whole-house repiping in Des Moines

A real person answers 24/7. You get a flat-rate price before any work begins.

What affects the price

Home size and layoutMore bathrooms, floors and fixtures mean more pipe and more connections.
Crawlspace or slabPipes in an open crawlspace or basement are easier to reach than pipes in finished walls.
Travel to Des MoinesAbout 35 minutes from our base via I-5 north.

Repiping questions in Des Moines

Narrowing old pipe is a common cause. Galvanized steel builds up rust inside over decades, and the upper floor feels it first. A pressure problem can also come from a valve or regulator, so we check before quoting. If the pipe is the cause, a PEX repipe comes with a flat-rate quote.

Here is what is typical once we are on site. Home visit and quote: typically 1 to 2 hours. Full repipe: typically several days. Des Moines is about 35 minutes from our base via I-5 north. We confirm timing with you when you book.

It depends on the size of your home, how many fixtures you have and how easy the pipes are to reach. A typical repipe takes several days. Your quote lays out the plan, including where walls will be opened, so you know what to expect.

Repiping in Des Moines

A real person answers 24/7, and our regular hours are Monday to Saturday, 8 AM to 5 PM.